Want to squeeze more power into your golf cart’s battery without waiting? Ever wondered how to trick a golf cart charger to speed up that sluggish charging process? Well, you are in for a treat!
To trick your golf cart battery charger, start by unplugging the charger from the power source, then locate the voltage selector switch. After locating it, set it lower than required for your battery size. This will fool the charger into charging faster. Plug the charger back in and monitor the charging process. It will indicate faster charging when the charging level plateaus.
To learn more about the process and some nifty tricks, I recommend reading this guide till the end. Only then, you will be ready to revive your golf cart in no time.
So, buckle up, and let’s dive into the world of charging magic!
Materials Needed To Trick Golf Cart Battery Charger
Table of Contents
To bring your dead golf cart battery back to life, you need to outsmart the charger. The main drill in this process is to utilize a fully charged or new golf cart battery and revive the dead battery.
So, you will generally need the following items to trick a golf cart charger.
- A fully charged or new golf cart battery
- A functional golf cart battery charger
- A couple of jumper cables
- A dead golf cart battery
How To Trick Golf Cart Charger – The Step-By-Step Process
Once you have the above items in hand, it is time to start the process of learning how to trick golf cart chargers. Before you start the process, you must respect the safety precautions. Although the process is not dangerous, you should wear safety gloves and goggles. I recommend wearing them in case something goes wrong.
Okay, if you are ready and have taken adequate safety measurements, then let’s start with the first step of this process.
Step 1: Disconnect The Charger The Power Source
The very first step is to disconnect the golf cart battery charger from the cart. There should be no connection between the charger and a power source, such as a battery bank or a power outlet.
Step 2: Find The Voltage Selector Switch
There should be a voltage selector switch in front of the charging unit. Also, you will notice a range of voltage, probably from 12 volts to 48 volts.
In this step, your job is to find this voltage selector switch, which should be pretty easy.
Step 3: Adjust The Voltage Settings On The Selector
According to the size of your battery pack, adjust the switch to a lower number than what your cart needs. This makes the charger think it is charging a smaller battery. Therefore, it charges the battery faster.
Step 4: Connect The Charger Back In
After adjusting the voltage settings, plug the charger back into power. Turn the charger on once you have plugged it in.
Step 5: Monitor How The Charger Is Charging
In this step, you need to keep an eye on the charging. You need to carefully observe whether the charger is overcharging the batteries or getting overheated while charging. If you notice any of these incidents, unplug the charger right away.
Step 6: Final Checks
When you see the charging level stop going up, it means you have successfully tricked your golf cart battery charger. As a result, you can charge your cart batteries faster than before.
Step 7: Turn Off The Charger
Your task is almost finished. At the end of this process, you need to turn off the charger and unplug it from the power source once your batteries are fully charged.
How To Confirm A Tricked Golf Cart Battery Charger?
So, you might have learned how to trick golf cart chargers by now. I guess you have an idea that even dead golf cart batteries can be charged. But the question is, how do you know whether you have tricked your golf cart batteries effectively?
Luckily, there are ways to confirm if you have successfully tricked a golf cart battery or not. For instance, you can use a load tester to get confirmation. Alternatively, you can use a multimeter, since a load tester might be hard to find.
If you are using a load tester, connect it to the dead golf cart battery. Before that, make sure you have disconnected the charger from the battery.
Once the tester is connected to the battery, observe the needle on the tester. The needle will point to the right if the dead battery is charged. Otherwise, you will know that you could not trick the charger.
The workflow is the same when you are using a multimeter. In fact, it is common since multimeters are more readily available than load testers.
No matter what you do, keep in mind that it is always best to consult a technician if you are not sure about any part of the process. You should be careful during the entire process. At the same time, you should know the proper ways to maintain golf cart batteries.
Other Ways To Trick Golf Cart Charger
I have already discussed the process of how to trick golf cart chargers using a voltage reducer or booster. Besides this method, there are other ways to trick your golf cart battery charger.
Unfortunately, not all methods are appropriate for all golf cart batteries. Always follow the instructions for your charger and battery equipment, and follow safety guidelines.
Here are some other ways to trick your charger into charging even a dead battery:
01. Utilize A Resistance Cord To Trick Golf Cart Charger
- Unplug The Charger: Disconnect the charger from power.
- Connect Resistance Cord: Attach one end of the resistance cord to the golf cart’s positive terminal and the other end to the negative terminal.
- Start Charger: Plug in the charger. It will believe it is attached to a battery with more charge. So, it will charge faster.
- Monitor Charging: Keep a close watch in case of overheating or overcharging.
- Turn Off Charger: When fully charged, turn off and unplug the charger before removing the resistance cord.
02. Utilize A Battery Jump Starter To Trick Golf Cart Charger
- Unplug The Charger: Disconnect the charger from power as usual.
- Connect Jump Starter: Attach the positive and negative terminals of the jump starter to the golf cart batteries.
- Start Charger: Plug in the charger. It thinks it is connected to a fully charged battery. Hence, it will start charging at full speed.
- Monitor Charging: Be cautious of overcharging or overheating.
- Turn Off Charger: Before disconnecting the jump starter, turn off the charger once it has finished charging.
03. Utilize A Computerized Battery Tender To Trick Golf Cart Charger
- Unplug The Charger: Disconnect the charger from its power source.
- Connect Battery Tender: Attach one end of the battery tender cable to the positive terminal of the golf cart batteries and the other end to a USB port on your computer.
- Start Charger: Your computer recognizes it as an external charging device, allowing more current than usual.
- Keep an Eye: Watch the charging process carefully.
- Turn Off Charger: When done, turn off and unplug the charger.
04. Energize Your Dead Battery By Connecting A High-Power Device To It
- Unplug The Charger: First, disconnect the golf cart charger from its power source.
- Connect Cable: Attach one end of the charger’s cable to the positive (+) terminal of the golf cart’s battery. Attach the other end to a wall outlet.
- Faster Charging: This setup lets the charger draw power from the batteries. Hence, the process makes them charge faster than usual.
Bottom Line
In the world of golf carts, time is of the essence. With these ingenious tricks up your sleeve, you have unlocked the secret of how to trick golf cart chargers.
By outsmarting your golf cart charger, you can harness the power of efficiency. Therefore, your trusty companion will always be ready to hit the green.
So go ahead and apply these tricks. Watch your golf cart go from zero to hero in no time.
